The cyclic force generator utilizes a pair of: unbalanced fly-wheels, rotating In opposite directions at a speed of 480 rpm, or 8 cycles per second. The vertical component of the acceleration of the unbalanced mass produces the cyclic force.The horizontal components cancel by virtue of the counter-rotation.

The amount of fly-wheel unbalance is precisely chosen to produce a 1000 pound peak to peak variation of force during each rotation of the fly-wheels at the proper speed. A tachometer indicator Is provided in the control unit, together with a speed, adjustment, to insure operation at the correct rate of 8 cycles per second.








Home
| About Us | Dynaflect Introduction | General Description | Technical Description | Calibration | Force Generator
Sensor Array | Beam Correlation | Deflection Basins | Advantages of Dynaflect | Contact Us

Copyright © 2001 Geo-Log, Inc. All Rights Reserved.
Geo-Log, Inc.
220 Industrial Avenue
Granbury, Texas 76049
USA

817-326-5321 - Office
817-326-5324 - FAX
Hawthorne@geo-log.net